Notes/Warnings; Swivelling Off The Drive Rollers; Switching Off The Easydriver; Switching Off The System - easydriver pro 1.8 Installation And Instruction Manual

7. Commissioning/operation
B6

Swivelling off the drive rollers:

Secure the vehicle against rolling off
before swivelling off the drive rollers!
Press the two arrow buttons on the
remote control and hold them down
until the drive rollers have been fully
retracted.
The display flashes until the swivelling-off process has
been completed. The motor drive automatically switch-
es off when the end position has been reached. The
symbol is permanently lit up once the swivelling-off
process has been completed.
B7

Switching OFF the easydriver

Switch off your easydriver by pressing the
I/O button on your remote control unit once.
The drive units may not remain engaged on the tyres,
as this might damage the tyres. Driving with a towing
vehicle while the drive units are connected is prohibit-
ed, as it might damage the caravan or trailer as well as
the towing vehicle.
B8

Switching OFF the system

Switch OFF the main or remote
switch, depending on the model.
The easydriver must be switched off after
every operation by using these switches. .
Pull the handbrake and/or secure your caravan or
trainer with trestles against unintended rolling-off.
GB10

8. Notes/warnings

8. Notes/warnings
The easydriver uses bidirectional communication be-
tween the remote control and the base station. This
makes it possible to transfer information from the base
station to the remote control.
Operating status display LED, blue

1x flashing per second: searching for the
base station

Permanently lit up: Connected to the base
station, system ready for operation.
Remote control battery LED, red

Symbol not lit up: Battery voltage is in order

1x per second flashing: Batteries should be
exchanged

Permanently lit up: Batteries empty. All
driving functions are terminated.