Usb Disk Information; Raid Information - Thecus IP Storage Appliance N3200PRO User Manual

eSATA Information
Item
Model
Capacity
Used Percentage
Firmware
Format
Eject
WARNING

USB Disk Information

From the Storage menu, choose the USB
item and the USB Information screen
appears. From here, you can see various
items about USB disks connected to the
N3200PRO.
USB Information
Item
Disk No.
Capacity (MB)
Model
Firmware
Status
Refresh

RAID Information

From the Storage menu, choose the RAID
item and the RAID Information screen
appears.
This screen lists the RAID volume currently
residing on the N3200PRO. From this screen,
you can get information about the status of
your RAID volume, as well as the status,
used percentage, and stripe size.
To configure your RAID settings, press the
Config button to go to the RAID
Configuration screen.
Description
Displays the eSATA hard disk model name.
Shows the eSATA hard disk capacity in megabytes (MB).
Shows the capacity remaining on the eSATA hard disk in
percentage (%) and megabytes (MB).
Shows the eSATA hard disk firmware version.
Press Format to format your eSATA hard disk.
Press Eject to unmount the eSATA hard disk.
Formatting will destroy all data on your eSATA hard disk. This data is not
recoverable.
Description
Number assigned to each USB disk.
Shows the capacities of each USB disk in megabytes (MB).
Displays the model names of each USB disk.
Shows the firmware version of each USB disk.
Shows the status of each USB disk. An Eject button appears
beside each USB disk. Press this button before removing the
USB disk.
Press Refresh to rescan the status of the USB disks.
25