Ositech Titan III Quick Start Manual

Ositech Titan III Wireless Cellular Gateway Introduction
For US models only
Dear Customer,
Thank you for choosing TITAN III Wireless Cellular Gateway. It has been designed
to provide you easy to use and reliable wireless connectivity for data
communications.
Before your Gateway can be configured for use with the LIFENET
associate an active cellular data plan with each Gateway.
If you have purchased the data plan from Physio-Control, your Gateway will be
shipped activated and your Physio-Control Implementation Project Manager will
contact you to complete the configuration and registration of your Gateway with the
LIFENET System.
If you will be using your own data plan, please follow the instructions below to
complete the activation of your Gateway on the cellular network.
The following information will be required to activate the Gateway with your cellular
Carrier:
For activation on CDMA networks such as Verizon:
1. Find the Mobile Equipment Identifier (MEID) for your cellular Gateway. For
your convenience, this can be found on the peelable portion of the box label,
as well as on the label applied to the device. This MEID # is made up of 14
hexadecimal digits.
2. Contact your local Carrier Rep/Store with the following information:
Gateway MEID # to assign the new phone number
o
Manufacturer: Ositech
o
Device Name: Titan III Wireless SD Gateway 3G
o
3. Your Gateway will require certain account features activated to function
properly. Please request the Carrier representative for the following features:
Telemetry/M2M/Machine to Machine line
o
Activated on at least 2-3MB data plan
o
Voice restriction
o
No static IP
o
System, you must
®
723000-0F5-NA Rev. B