Advertisement
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Turbo Incanto TIA732
Summary of Contents for Turbo Incanto TIA732
- Page 1 TIA732 Induction Hob Instruction Manual...
-
Page 2: Table Of Contents
Contents Safety instructions ................ 2 Installation ..................5 Description of the appliance ............8 Error Code .................. 10 Pots and pans and how to use them ........... 11 Maintenance and cleaning ............13 Troubleshooting ................15 Environmental note ..............16... -
Page 3: Safety Instructions
1. Safety instructions Important This appliance generates magnetic field in the direct vicinity. ATTENTION: People with PACEMAKERS must ensure that their pacemaker has been designed in conformity with the norms in force. It is recommended that the manufacture or your doctor is consulted to verify any incompatibility. - Page 4 Children must not be in the kitchen when the hob is in use. After use, when the cooking element or entire hob is turned off, a residual heat indicator will come on, showing an H (hot) for each cooking area that was used: this indicates that the corresponding cooking area is still dangerous.
- Page 5 Important The heating elements do not work if the pan has a diameter that is too small or not magnetically detectable.To verify that the material of the pan is suitable,that is ferrous, use a magnet.To prevent damage to the electronic circuit, the hob has a sensor that constantly controls the temperature of the circuit itself: in the case of overheating the hob automatically reduces power or turns itself off until a safe temperature is reached.
-
Page 6: Installation
2. Installation Preparing the unit for a built-in appliance 1. Drill a hole on the table surface according to the size shown in the drawing.For the purpose of the installation and use,a minimum of 50mm space shall be preserved around the hole. - Page 7 Product Dimensions WARNING The kitchen units that are in direct contact with the appliances must be heat-proof (min. 95°). The appliance can be installed on a work surface with a thickness of between 30 and 40 mm and near to walls which are higher than the work surface,maintaining a minimum distance of 100 mm.
- Page 8 Installing the hob WARNING Risk of cutting. Be careful of cutting edges. End parts in foamed plastic - be careful. During transportation these could cause slight injury or cuts. Remove the material and envelope of documents from the packaging. Before proceeding with installation read the work instructions carefully. Step.1 Put a towel or cloth on the work surface.Place the hob face down on the protected surface.
-
Page 9: Description Of The Appliance
3. Description of the appliance Control Panel Schematic diagram of the control panel Instruction ON/OFF：Turn on or turn off the machine. CHILD LOCK: Press the button one time tolockit.Other button can't operate when it is lock. Long press the button to unlock. UP：Increase the power level or add the time. - Page 10 Operation Operate and display requirement (1) Standby status: Plug in and connect to the electrical supply,the buzzer will“beep” andall indicator lights and all characters on thedigital display are lit on for 1S and the child lock indicator lights are not on,indicating that the induction cooker is in standby state. (2) Work status: A:"on / off"...
-
Page 11: Error Code
D: Child Lock Standby state or working state: child lock indicator lightextinguished, you can long press the child lock button to enter into lockedmode. Other keys will be invalid except on/off button at this time. Unlock: Long press the child lock button for 2S. Lock: The child lock indicator light is not on, long press the child lock button for 2S to enter into locking state and the child lock indicator light will stayin the locked state. -
Page 12: Pots And Pans And How To Use Them
5. Pots and pans and how to use them Attention The pots and pans that can be used on this hob must be made of ferromagnetic material. They can be made of enameied steel, cast iron or special pans of stainless steel for induction. - Page 13 Never have the hob to For sealed foods such ascanned The appliance is not intended to be workwithout food in pot, goods, please do notheat them used bychildren or otherwiseits operational before openingtheir covers so as to handicappedpersons, unless they performancemay be affected and avoidany dangers of explosion due havebeen supervised by a...
-
Page 14: Maintenance And Cleaning
6. Maintenance and cleaning 1. Please shut off the power and pull out the plug before cleaning of the appliance. 2. Clean the appliance when it cools down completely. 3. To remove dirt, please select illustrious detergent. 4. After removing dirt, please use neat wet cloth to clean the unit. 5. - Page 15 Cleaning techniques Attention:When chemical products heat up they can corrode and damage the glass, moreover the fumes can be dangerous for your health. Clean the surface when it is completely cold except for the following: dried sugar, syrupy sugar, tomato sauce, milk, these must be removed immediately with the scraper.
-
Page 16: Troubleshooting
7. Troubleshooting Problem Possible causes What to do The appliance does not The appliance is not powered, Check that the appliance is work, the control lights the plant is defective. connected, that thereis are all off. electricity and that the current limiter or differential has not intervened. -
Page 17: Environmental Note
8. Environmental note Note: Before discarding an old appliance, switch off and disconnect it from the power supply. Cut off and render any plug useless. Cut the cable off directly behind the appliance to prevent misuse. This should be undertaken by a competent person. This appliance is marked according to the European directive 2002/96/EC on Waste electrical and Electronic Equipment (WEEE).
Need help?
Do you have a question about the TIA732 and is the answer not in the manual?
Questions and answers