Advertisement
9. Mount Camera, with Camera Plate installed, to the Camera Bracket that is installed on
Tripod Tower.
10. Connect Camera Antenna Cable to Antenna after you have removed the protective
cover. Please only hand tighten, making sure it is not overtightened.
11. Place Controller Box under Solar Panel making sure the notched hole is closest to the
panel cable. Insert the Long Latch Cable and Charge Cables thru the notched hole in the
side of Controller Box.
12. Connect color coded cables together inside of the Controller Box by matching the colors
and making sure there is a proper fit. Then, connect the Red Battery Cable to the positive
(+) terminal on the battery and the Black Battery Cable to the negative (-) terminal on
the battery.
13. Turn the unit on by pressing the red button with a picture of a light bulb, then on the
side of the Camera you will see the Power, Signal, and Carrier lights come on. The lights
are green and typically will illuminate green within 60-90 seconds.
14. Uncoil the Latch Cable and plug into the Latch on the Trap Winch Stand, then use the
Cable Holder to get the cable off the ground and suspended.
15. Log in to BoarBuster HD Portal to review camera angle and position prior to leaving the
field. If adjustment is needed, remove screws on both sides of camera lens with the
supplied driver to adjust camera. You will not be able to adjust the camera lens remotely.
Advertisement
