Invacare Alegio Series User Manual page 12

I) J)
L)
Mounting the Invacare
1. Mount the shear arm (see illustration K, J, I, H and G).
2. Mount the leg section and the pipe pins, ensuring that the spring clip is securely latched over
the end of the pin (see illustration F and E).
3. Mount the head section (see illustration D and C).
4. Push the head section into the leg section (see illustration L).
5. Mount the cable for the backrest motor/leg section (see illustration B).
6. Mount the finger screws in both sides (see illustration A).
7. Mount the accessories: Siderails, bed ends and lifting pole.
Caution! Please ensure that the pipe pins are fully inserted through both holes of the tubular
section, and that the spring clip is fully engaged prior to operating the lifting mechanism on the bed.
Furthermore, please ensure that all four plastic bushings are intact and located correctly between
shear arm/base and shear arm/top frame.
NB! Do not pull the clamp part of the pipe pin during dismantling – the clamp may be deformed,
thus being unable to lock properly .
Mounting of the pipe pin between shear arm and base
The pipe pin must be mounted with the opening upwards
and locked.
Alegio
® TM
K)
14