Configuration with the NCTerminal Software
The settings in the "Data mode" group box define the data transmis-
sion between two VideoJet X.21/G.703 devices, i.e. Video-
Jet
transparent data transmission between each of the "camera" ports,
mode "Transparent 1" must be selected.
Unlike transparent mode 1, with "Transparent 2" the binary data of
the remote unit are transmitted with the control commands to a local
NCP device. This option only makes sense if selected in combina-
tion with operating devices that support the control protocol NCP.
VideoJet X.21/G.703
XS/GS
sender connected to a VideoJet
Manual
XE/GE
receiver. For
65