Advertisement
Quick Links
Advertisement
Related Manuals for AEG Powertools SBE 630 R
Summary of Contents for AEG Powertools SBE 630 R
- Page 1 SBE 630 R Original Instructions...
- Page 3 VIII...
- Page 10 IV VI...
- Page 12 VIII...
-
Page 13: Technical Data
TECHNICAL DATA Percussion drill SBE 630 R Rated input ..................................... 630 W Output ......................................320 W No-load speed ................................... 0-2800 min Speed under load max................................0 - 1750 min Rate of percussion under load max............................. 44 800 min Drilling capacity in concrete ................................ -
Page 14: Specified Conditions Of Use
SPECIFIED CONDITIONS OF USE SYMBOLS The electronic drill/screwdriver can be universally used for drilling, percussion drilling, screwdriving and cutting screw threads. Please read the instructions carefully before starting the machine. Do not use this product in any other way as stated for normal use. MAINS CONNECTION CAUTION! WARNING! DANGER! Connect only to single-phase AC current and only to the system... - Page 16 w w w . a e g - p t . c o m AEG Elektrowerkzeuge AEG Elektrowerkzeuge Max-Eyth-Straße 10 Max-Eyth-Straße 10 D-71364 Winnenden D-71364 Winnenden Germany Germany...
Need help?
Do you have a question about the SBE 630 R and is the answer not in the manual?
Questions and answers
How to remove the keyless chuck and replace it with key chuck?
The provided context does not contain specific instructions for removing the keyless chuck and replacing it with a key chuck on the AEG Powertools SBE 630 R. However, general steps for replacing a keyless chuck on a drill typically include:
1. Unplug the Drill – Ensure the drill is disconnected from the power supply for safety.
2. Open the Chuck – Fully open the chuck jaws to access the retaining screw inside.
3. Remove the Retaining Screw – If present, remove the screw inside the chuck (usually reverse-threaded).
4. Detach the Chuck – Hold the chuck firmly and rotate counterclockwise to unscrew it from the spindle. A hex key inserted into the chuck and struck with a hammer can help loosen it.
5. Install the Key Chuck – Screw the new key chuck onto the spindle and tighten securely.
6. Secure with Retaining Screw – If a retaining screw was removed, reinstall it tightly.
For precise instructions and compatibility, refer to the tool’s manual or contact an AEG service agent.
This answer is automatically generated