General Setup; System Setup - FUNAVO 918A Quick User Manual

Press repeatedly to switch or hide the relative information
DISPLAY
of the playing disc.
Press this button to zoom in the scene. The available zoom
ZOOM
ratios are: 2×,3× and 4×,in zoomed-in mode, the direction
keys can be used to move the zooming center.(Note:
Applies to DVD,VCD,MPEG4,etc)
REV/FWD
Press "REV" to search backward,"FWD" to search forward.

GENERAL SETUP

CHARGING THE UNIT
This player is powered by a lithium-polymer battery.It features a high
ratio of energy to weight.It has no memory effect and it can be
recharged at any time regardless of whether it is fully or partially
discharged. It takes about 6hours to fully charge the battery and a fully
charged battery can be used for up to two hours.
Connect the attached AC/DC adaptor to the DC INPUT jack on the unit,
then plug the adaptor into a 240V AC outlet.
Note: Make sure to switch off the unit before charging. The charging
indicator LED will change from RED to GREEN to indicate that the
battery has been fully charged.
Usage and Maintenance of the rechargeable battery.
1.The working temperature of the rechargeable battery ranges from 0
℃ to 45℃.
2.Always unplug the unit when it is not being used unless it is being
charged.
3.Heat is inevitably produced during playback, this is normal. However
switch off and allow it to cool down.
4.Avoid banging the battery and keep it away from heat and moisture.
CONNECTION TO TV
This unit can be connected to a TV in order to enjoy high quality music,
movies etc with a TV.
Use an AV cable to connect the AV OUT jack on the unit to the AV IN
jack of a TV.
9