Number-System Modes
Number system modes are second functions of keys.
Selects decimal mode (default). When the
calculator is in another number mode,
press
to return the calculator to
decimal mode. Note: Normally you should
keep the calculator in the decimal mode,
because some of the calculator's operating
features are limited or nonexistent in the
other modes.
Selects octal mode. You can enter positive
octal numbers as large as 3777777777.
Numbers beyond this are interpreted as
negative.
Selects hexadecimal mode. You can enter
positive hexadecimal numbers as large as
7FFFFFFFFF. Numbers beyond this are
interpreted as negative.
To enter the hexadecimal digits A through F, press
and then the appropriate key shown below.
D
E
A
B
40
Ti36eng1.doc TI-36X II Manual Linda Bower Revised:
01/10/03 10:47 AM Printed: 01/10/03 10:47 AM Page 40 of
48
F
C