Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Sun Microsystems SUN-FOSC-ZT702 Series
Summary of Contents for Sun Microsystems SUN-FOSC-ZT702 Series
- Page 1 User’s Manual SUN-FOSC-ZT702 Series Fiber Optic Splice Closure English Table: SUN-UM-CM-FOSC002 Version: A/0 All the trademarks mentioned in this manual are registered property of Sun Telecom. The right to interpret this manual is reserved by Sun Telecom.
- Page 2 Fiber Optic Solutions Provider 1. Scope of application This Installation Manual is suit for the Fiber Optic Splice Closure (Hereafter abbreviated as FOSC), as the guidance of proper installation. The scope of application is: aerial, underground, pipeline, handhole. 2. Applicable temperature ...
- Page 3 Fiber Optic Solutions Provider 4.2 Splice fibers, install heat shrinkable protective sleeve See figure 4 follow user manual of fusion splicing machine to splice fiber cores. When having completed splicing the fibers, the first fiber ring should be housed on the farthest side of FOST, the remaining fiber should be winded, forming a ring with diameter not less than 80mm.
- Page 4 Fiber Optic Solutions Provider 5. Assemble FOSC housing 5.1 Put desiccant into FOSC 5.2 Put FOSC cover on base directly. 5.3 Install plastic hoop between FOSC cover and the base, tighten hoop locking system, which is to be fixed by hoop fixing bolt then. 5.4 All nuts (plastic ones) of base need to be re-tightened once more.
Need help?
Do you have a question about the SUN-FOSC-ZT702 Series and is the answer not in the manual?
Questions and answers