Advertisement
Quick Links
INSTRUCTIONS FOR USE
Magrini Baby Changing Unit - Model MT80
90mm min.
110mm
min.
110mm min.
Front of Counter
Position frame on counter top.
Allow the minimum dimensions as shown.
Position unit centrally at back of the frame.
Engage Tabs
Push unit back until the tabs engage fully.
Back Wall
90mm min.
Counter Top
110mm min.
Magrini Limited
Unit 5, Maybrook Industrial Estate, Brownhills, Walsall WS8 7DG
Tel: 01543 375311 Fax: 01543 361172 Email: sales@magrini.co.uk Web: www.magrini.co.uk
Pozi Pan Screws
x10
x10
110mm
min.
Secure frame using the 10 gauge x 20mm screws
provided.
Lower unit over frame. Take care to align tabs as shown.
Allen Screws
x2
Secure with the two M5 x 30mm screws provided.
We recommend that the unit is sealed around the bottom
edge with silicone sealant.
Doc: MT8001 DATE: October 2010
Advertisement
Related Manuals for Magrini MT80
Summary of Contents for Magrini MT80
- Page 1 We recommend that the unit is sealed around the bottom edge with silicone sealant. Magrini Limited Unit 5, Maybrook Industrial Estate, Brownhills, Walsall WS8 7DG Tel: 01543 375311 Fax: 01543 361172 Email: sales@magrini.co.uk Web: www.magrini.co.uk Doc: MT8001 DATE: October 2010...
- Page 2 To assure proper installation, we suggest that a qualified person install this unit. Magrini Ltd., will not be responsible if the changing station is not installed correctly. All recommended fixings are supplied. Replacements are available free of charge from Magrini - do not use less substantial fittings.