Magrini MT80 Instructions For Use

Magrini Baby Change Unit - Model MT80
IMPORTANT: RETAIN FOR FUTURE REFERENCE. READ CAREFULLY.
This changing unit must be fixed to a counter top for safe use of the product using the fixings supplied.
This unit does not require a changing pad and therefore, no pad is supplied with this unit.
To assure proper installation, we suggest that a qualified person install this unit. Magrini Ltd., will not be
responsible if the changing station is not installed correctly.
All recommended fixings are supplied. Replacements are available free of charge from Magrini - do not
use less substantial fittings.
Changing Unit Fixing Parts (supplied):
10 No. Pozi Pan Head Screws
10 Gauge x 20mm
Tools required:
• No.2 Pozidrive Screwdriver • Allen Key Bit (supplied)
• Drill • Silicone Sealant
Cleaning Instructions
The nappy changing unit may be washed
and wiped with a damp soft cloth or
sponge. Use of mild detergent and warm
water will remove the majority of dust
and stains. For more obstinate stains a
domestic cream cleaner can be used.
Do not use any abrasive cloths, caustic or
solvent cleaners as these may damage the unit.
Maintenance Instructions
Check that the unit is securely fixed to the counter.
Ensure warning label is in place on the inside of the unit and general cleanliness is within
given guidelines.
Any replacement parts must be obtained from Magrini only.
Note: All assembly fittings shall always be correctly tightened and checked regularly. Screws shall not
be loose because a child can squeeze parts of the body, or clothing (e.g. strings, necklaces,
ribbons for babies, dummies, etc.) could get caught. There would be danger of strangulation.
Units should be fitted no less than 100mm from the corner of the room to enable access for
cleaning. Be aware of the risk of open fire and other sources of strong heat, such as electric bar
fires, gas fires etc. in the near vicinity of the unit.
WARNING: DO NOT LEAVE THE CHILD UNATTENDED.
Weight/age of the child for which the product is intended: 12 months, up to 11kg.
Do not use the changing unit when any part is broken, torn or missing.

INSTRUCTIONS FOR USE

2 No. Allen Screws
M5 x30
Magrini Limited, Unit 5 Maybrook Industrial Estate, Brownhills, Walsall WS8 7DG
t: 01543 375311 • e: sales@magrini.co.uk • w: www.magrini.co.uk