LG FC1409D4E Owner's Manual page 30

Add Item s
Use this option to add or remove the laundry after
the washing programme is started.
1
Press the Add Item button when the LED is
turned on.
2
Open the door after it unlocks itself.
3
Add or remove laundry.
4
Close the door and press the Start/Pause
button.
NOTE
• For safety reasons, the door remains locked
when the water level or temperature inside
of the drum is high. It is not possible to add
laundry at this time.
Child Lock i
Use this function to disable the controls. This
function can prevent children from changing cycles
or operating this appliance.
NOTE
• Once this function is set, all buttons are locked
except the Power button.
• When the controls are locked, CL and the
remaining time are alternatively shown on the
display during the wash while the Child Lock
is engaged.
• Turning off the power will not reset this
function. You must deactivate this function
before you can access any other functions.
Locking the Control Panel
1
Turn on the power.
2
Press and hold the Delay End and Add Item
button for 3 seconds to activate this function.
• A beeper will sound, and CL will appear on
the display.
30
Unlocking the Control Panel
1
Turn on the power.
2
Press and hold the Delay End and Add
Item button for 3 seconds to deactivate this
function.
Temp.
You can use this option in order to select the
wash and rinse temperature in combination for the
selected programme. Press this button until the
desired setting is lit. Cold tap water is used for all
rinses.
• Select the water temperature suitable for the
type of laundry you are washing. Follow the
fabric care labels for best results.
Spin p
Use this option to change the spin strength. Press
the Spin button repeatedly to change the speed
level.
1
Press the Power button
2
Select a washing programme
3
Press the Spin button to select spin speed.
4
Press the Start/Pause button.
Beep On/Off
This function operates only when the appliance is
in operation.
• Press and hold the Temp. and Delay End
button for 3 seconds to set the this function.
NOTE
• Once this function is set, the setting is
memorized even after the power is turned off.
• If you want to turn the beeper off, simply repeat
this process.
EN