Advertisement
Step 1:
Attach the Mic Stand Adapter (Item 1) to
your microphone stand (not included).
Step 2:
Attach the EVID 3.2 (or the 3.2 SOS) to the
Mic Stand Adapter using one flat washer
(Item 3) in-between the Adapter and the
EVID.
Step 3:
Use the adjustment knob to adjust the angle
of the EVID.
If not attaching a boom to the EVID, attach
Logo Cap as shown.
Mounting a Microphone and Boom to your EVID (MA-3 and SOS)
Step 1:
Attach the Boom Adapter (Item 2) to the top
of the EVID with a flat washer (Item 3) in
between the Adapter and the EVID.
Step 2:
Mount the Boom (Not Included) to the Boom
Adapter (Item 2).
Step 3:
Replace any microphone mount with the
Shock-Proof Mic Mount (Item 5, EVID 3.2
SOS only).
12000 Portland Avenue South, Burnsville, MN 55337
Phone: 952/884-4051, Fax: 952/884-0043
www.electrovoice.com
© Telex Communications, Inc. 2/2003
Part Number 38110-087 Rev C
All manuals and user guides at all-guides.com
Mic Stand Mounting (MA-3 and SOS)
Item 3
Item 4
Item 1
For warranty information, contact the Service Repair department at:
Logo Cap
(Included with
standard EVID 3.2)
Item 3
Adjustment
Knob
Boom
(Not Included)
Item 2
Item 5
(Included only with
EVID 3.2 SOS
Monitor Package)
Item 4
Item 1
U.S.A. and Canada only. For customer orders,
contact the Customer Service department at
800/392-3497 Fax: 800/955-6831
Europe, Africa and Middle East only. For customer orders,
contact the Customer Service department at
49 9421-706 0 Fax: 49 9421-706 265
616/695-6831 or 800/685-2606
For technical assistance, contact Technical Support at:
Specifications subject to change without notice.
866/78AUDIO
Advertisement
