1. Manuals
  2. Brands
  3. NimbeLink Manuals
  4. Microcontrollers
  5. Skywire Series
  6. Manual

NimbeLink Skywire Series Manual

File transfer protocol ftp
Hide thumbs Also See for Skywire Series:
Table of Contents

Advertisement

Quick Links

Download this manual
Skywire​
Development Kit File
®​
Transfer Protocol (FTP)
NimbeLink Corp
Updated: January 2019
PN 30047 rev 3
NimbeLink Corp. All Rights Reserved.
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Skywire Series and is the answer not in the manual?

Questions and answers

Related Manuals for NimbeLink Skywire Series

Summary of Contents for NimbeLink Skywire Series

  • Page 1 Skywire​ Development Kit File ®​ Transfer Protocol (FTP) NimbeLink Corp Updated: January 2019 PN 30047 rev 3 NimbeLink Corp. All Rights Reserved.

  • Page 2: Table Of Contents

    3.3 Set the Time Out Period 3.4 Open an FTP Connection 3.5 Set the File Type 3.6 Upload the File to the FTP Server 3.7 Close the FTP Connection 3.8 Deactivate the Data Session (If Necessary) PN 30047 rev 2 NimbeLink Corp. All Rights Reserved.

  • Page 3: Prerequisites

    This document assumes you have completed the initial setup of your modem and development kit. If you have not completed those steps, refer to the Skywire® Development Kit User Manual and complete the modem setup before proceeding. PN 30047 rev 2 NimbeLink Corp. All Rights Reserved.

  • Page 4: Download From An Ftp Server

    The FTP connection has now been established. Note: If you do not specify a port, the default value of 21 will be used. 2.5. Set the File Type In the terminal program, type the following command: AT#FTPTYPE=x PN 30047 rev 2 NimbeLink Corp. All Rights Reserved.

  • Page 5: Change The Working Directory (If Necessary)

    2.9 Deactivate the Data Session (If Necessary) To close the data session, type the following into the terminal program: AT#SGACT=1,0 followed by the enter key, and the terminal program should respond with: PN 30047 rev 2 NimbeLink Corp. All Rights Reserved.

  • Page 6: Upload To An Ftp Server

    The FTP connection has now been established. Note: If you do not specify a port, the default value of 21 will be used. 3.5 Set the File Type In the terminal program, type the following command: AT#FTPTYPE=x PN 30047 rev 2 NimbeLink Corp. All Rights Reserved.

  • Page 7: Deactivate The Data Session (If Necessary)

    3.8 Deactivate the Data Session (If Necessary) To close the data session, type the following into the terminal program: AT#SGACT=1,0 followed by the enter key, and the terminal program should respond with: PN 30047 rev 2 NimbeLink Corp. All Rights Reserved.

This manual is also suitable for:

Skywire nl-swdkSkywire nl-sw-1xrtt-sSkywire nl-sw-1xrtt-vSkywire nl-sw-gprsSkywire nl-sw-1xrtt-aSkywire nl-sw-evdo-a ... Show all

Table of Contents