Advertisement
1. If you are using non-rechargeable batteries, remove them
BEFORE inserting USB plug adapter.
2. Plug DC jack end of USB cable in DC socket of the reading
light.
3. Connect the USB plug end of the cable to the computer USB
port (USB 1.0- and 2.0-compatible).
4. Turn on the light to your desired brightness level and enjoy!
NOTE: Due to current restrictions of USB (500mA), USB-
powered light may not seem as bright as battery-powered light.
USB Battery Recharge Function
IMPORTANT: Use NiMH or NiCD rechargeable AA batteries
only! DO NOT attempt to charge non-rechargeable batteries.
1. Switch book light to OFF position (must remain in OFF
position for recharge function).
2. Connect USB cable from the book light to the computer
USB port (as described above). Battery charging time is
approximately 10 to 14 hours.
USB-Powered Operation
4
Advertisement
