Advertisement
About Us
We appreciate your business!
Congratulations on your new SAWYER product. We are proud to
have you as our customer and will strive to provide you with the best
service and reliability in the industry. This product is backed by our
extensive warranty and world-wide service network. To locate your
nearest distributor or service agency, please contact us at the phone
number and address listed on the bottom of each page.
You are in good company!
Sawyer Manufacturing Company is the world leader in the design
and manufacture of pipeline and welding equipment and has been
since 1948. Sawyer equipment has become a standard in the industry
and continues to set the benchmark for quality and durability.
This user operation manual has been made to instruct you for the best
use and operation of your Sawyer product. Your satisfaction with our
products is our main goal. Please read this entire manual carefully,
noting all tips, notes and warnings. Safety always comes first.
Coupon Cutter
F
E
A. Bump Stops
B. Turn Handle (length)
C. Rectangular Rest Wing-Nuts
D. Torch Holder
E. Rectangular Rests
F. Support Rods
Record the following information for warranty purposes:
Where purchased:________________________________________________
Purchase date:___________________________________________________
Equipment Serial #:_______________________________________________
G
A
C
D
G. Turn Handle (width)
H. Torch Holder Thumbscrew
I. Boomer Chain Assembly
*not pictured*
Sawyer Manufacturing Company
7799 S. Regency Dr., Tulsa, OK 74131 USA
P
918.834.2550
sawyermfg.com
B
H
!
CAUTION:
Sawyer Manufacturing offers an easy to use line
of internal line up clamps for the purpose of welding two pipes
together. The internal line up clamps are not intended to be used
as sole supports of the pipe nor to lift the pipe. After each use clean
and store in a warm, dry area.
All products manufactured by or for Sawyer Manufacturing Company are
guaranteed against defects due to faulty workmanship or materials for twelve
months from the date of purchase.
This guarantee is limited to the repair or replacement of any parts found to be
defective, and no other liability–expressed, implied, or contingent–is assumed.
F
918.834.0318
info@sawyermfg.com
V1.2
Coupon Cutter
Model 270D
CAUTION
Warranty
!
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Sawyer 270D
Summary of Contents for Sawyer 270D
- Page 1 Sawyer Manufacturing Company is the world leader in the design and manufacture of pipeline and welding equipment and has been since 1948. Sawyer equipment has become a standard in the industry and continues to set the benchmark for quality and durability.
- Page 2 Note: Coupon cutter is also designed for flat plate Fig. 2 Wrap boomer chain assembly (H) around pipe. Clamp onto support rod. (F, Fig. 2) H H H Sawyer Manufacturing Company 7799 S. Regency Dr., Tulsa, OK 74131 USA 918.834.2550 918.834.0318 sawyermfg.com info@sawyermfg.com...
- Page 3 Note: For coupon sample size and thickness please refer to the correct API, ASME and AWS codes Note: Coupon samples should be cut to a maximum 1 ¾” x 7 ½” in conjunction with the Sawyer Manufacturing Tensile Testers CAUTION...
- Page 4 Operation Operation Fig. 7 . Set (4) bump stops (A, Fig 7 & Fig. 8) to desired position. Tip: Use 5/16” wrench to loosen bump stop set screws. Fig. 8 Fig. 9 . Turn handle (B) for coupon length (Fig. 9), Turn handle (G) for coupon width.
Need help?
Do you have a question about the 270D and is the answer not in the manual?
Questions and answers