Sawyer 205CS Quick Set Manual

About Us

We appreciate your business!
Congratulations on your new SAWYER product. We are proud to
have you as our customer and will strive to provide you with the best
service and reliability in the industry. This product is backed by our
extensive warranty and world-wide service network. To locate your
nearest distributor or service agency, please contact us at the phone
number and address listed on the bottom of each page.
You are in good company!
Sawyer Manufacturing Company is the world leader in the design and
manufacture of pipeline and welding equipment since 1948. Sawyer
equipment has become a standard in the industry and continues to set
the benchmark for quality and durability.
This user operation manual has been made to instruct you for the best
use and operation of your Sawyer product. Your satisfaction with our
products is our main goal. Please read this entire manual carefully
noting all tips, notes and warnings. Safety always comes first.

Parts Diagram

*Note: Torch not included*
A, B&C
H
G
M
A. (2x) 9/16" Nut
B. (2x) Washer
C. Spacer
D. Torch Arm Assembly (42AK-1)
E. Locking Boomer, Spring, Chain (4AW-1, 4AW-2 & 4AW-3)
F. Adjustable Mounting Arms
G. Torch Holder Adjustment Knob
H. 37.5-0-37.5 Degree /Bevel Indicator (4HT)
Record the following information for warranty purposes:
Where purchased:________________________________________________
Purchase date:___________________________________________________
Equipment Serial #:_______________________________________________
D
A&B
I. Square Nut
J. (2x) Torch Arm Mounting Bolts *not shown*
K. Position Adjustment Knob
L. Gear Box Assembly (2J-2 & 2J-1)
M. Locking and Unlocking Saddle Arm Pin
N. Swivel Snap (300-001)
O. Clamp Swing Bar *not shown, #0 only*
P. Clamp Screw *not shown, #0 only*
guaranteed against defects due to faulty workmanship or materials for twelve
This guarantee is limited to the repair or replacement of any parts found to be
Sawyer Manufacturing Company
7799 S. Regency Dr., Tulsa, OK 74131 USA
P 918.834.2550 F
sawyermfg.com info@sawyermfg.com
V1.2
Quick Set Manual
L
F
N
E

Warranty

All products manufactured by or for Sawyer Manufacturing Company are
months from the date of purchase.
defective, and no other liability, expressed, implied or contingent is assumed.
918.834.0318
Beveling Model 205CS
0. (1 1/2"-4", 9lbs)
1. (3"-8", 14lbs)
2. (8"-14", 19.5lbs)
3. (14"-20", 33lbs)
I
K