Other Operations Drc (Dynamic Range Control) - LG NB5540 Owner's Manual

Basic operations
USB operation
1. Connect the USB device to the USB port.
2. Select the USB function by pressing FUNCTION
on the remote control or F on the unit until the
function is selected.
To
Stop Press Z.
Playback Press d/M.
During playback, press d/M.
Pause
During playback, press V
on the remote control to go
to the next file.
Playing less than 2 seconds,
press C on the remote
Skip to the next/
control to go to the previous
previous file
file.
Playing after 3 seconds, press
C on the remote control
to go to the beginning of
the file.
Press and hold C/V
Search for a during playback and release it
section within a at the point you want to listen
file to. (except FLAC and OGG
files)
Press REPEAT on the remote
control repeatedly, the
Play repeatedly display will be changed in the
or randomly following order, OFF RPT 1
ALL RANDOM.
Press 0 to 9 numerical buttons
Select a file
on the remote control to go
directly
to the desired file directly.
Press FOLDER W/S on the
Search a folder
remote control.
This unit memorizes a current
Resume song which is played before
playback changing the function or
turning off the unit.
NB5540-NE_DDEULLK_ENG_3520.indd 19
Do this
RPT DIR (DIRECTORY) RPT
,
Note
The resume point may be cleared when you
pull out the power cord or removing the USB
device from the unit.
Other operations
DRC (Dynamic Range Control)
Make the sound clear when the volume is turned
down (Dolby Digital only). Set to [DRC ON] by using
DRC.
AV Sync
When receiving audio signals from TV, sound and
images may not be matched. In the case, this
function can adjust the delay time.
1. Press AV SYNC.
2. Use C/V to scroll up and down through
the delay amount, which you can set at
anything between 0 and 300 ms.
,
Note
This function does not operate on USB
function.
Turn off the sound temporarily
Press MUTEi to mute your unit.
You can mute your unit, for example, to answer
the telephone, "MUTE" is displayed in the display
window.
To cancel it, press MUTEi again on the remote
control or change the volume level.
Displaying file and input
source
You can display various information of the input
source by pressing INFO.
USB : File information contained on a USB (MP3/
WMA/OGG/FLAC/WAV)
OPTICAL/ARC/HDMI IN : Audio format, Audio
channel
Operating 19
3
2016-02-19 4:42:56