3.6.9
USB Configuration
The items in this menu allow you to change the USB-related features.
The Mass Storage Devices item shows the auto-detected values. If no USB device is
detected, the item shows None.
USB Single Port Control
This item allows you to enable or disable the individual USB ports.
Refer to section 1.1.2 Motherboard layout for the location of the USB ports.
3.6.10
Network Stack Configuration
The items in this menu allow you to configure Ipv4 / Ipv6 PXE support.
3.6.11
NVMe Configuration
You may view the NVMe controller and Drive information if a NVMe device is connected.
3.6.12
HDD/SSD SMART Information
The items in this menu display the SMART information of the connected devices.
NVM Express devices do not support SMART information.
3.7
Monitor menu
The Monitor menu displays the system temperature/power status, and allows you to change
the fan settings.
Qfan Configuration
Qfan Tuning
Click this item to automatically detect the lowest speed and configure the minimum
duty cycle for each fan.
3.8
Boot menu
The Boot menu items allow you to change the system boot options.
Boot Configuration
Setup Mode
[Advanced Mode]
[EZ Mode]
ASUS WS C246 DC
This item allows you to go to Advanced Mode of the BIOS after
POST.
This item allows you to go to EZ Mode of the BIOS after POST.
3-17