Onboard Leds - Asus WS C246 DC User Manual

1.1.7

Onboard LEDs

1. Q LED (CPU, DRAM, VGA, BOOT)
Q LED checks key components (CPU, DRAM, VGA card, and booting devices) in
sequence during motherboard booting process. If an error is found, the corresponding
LED remains lit until the problem is solved. This user-friendly design provides an
intuitive way to locate the root problem within seconds.
The Q LEDs provide the most probable cause of an error code as a starting point for
troubleshooting. The actual cause may vary from case to case.
2. Q-Code LED
The Q-Code LED design provides you with a 2-digit error code that displays the system
status.
•
•
1-10
The Q-Code LED provides the most probable cause of an error code as a starting
point for troubleshooting. The actual cause may vary from case to case.
Please refer to the Q-Code table in the Appendix section for more details.
Chapter 1: Product Introduction