Singer 1030 Instruction page 23

CURVED SEAMS
1. Use a short stitch for elasticity and
strength. For example, if you use 12
stitches to the inch for straight seams,
select 15 to 20 stitches per inch to stitch
curved seams in the same fabric.
2. If you use the seam guide, attach it at an
angle so that the edge that is closer to the
needle acts as a guide.
REINFORCtNG END OF SEAM
1. Stitch to the edge of the fabric. (Do not sew
beyond edge of fabric.)
2. Press stitch-length dial all the way down
and hold In place. Backstitch approx
imately V Inch to reinforce end of seam.
2
Release stitch-length dial.
3. Raise take-up lever to its highest position
and raise presser foot. Remove the fabric
by drawing it to the back and left.
4. Cut threads on thread cutter at rear of
presser bar.
Instrukcje obsługi maszyn do szycia firm Polskich jak i zagranicznych np. Singer Toyota Pfaff Gritzner Łucznik Arka
stitching a Curved Seam
Reverse Stitching
maszynykrawieckie.shophurt.pl
19