OUMAN 3G-MOD3 Quick Start Manual

Ouman 3G-MOD3 is a 3G modem which can be used to create a mobile network in premises where such a network does
not readily exist. Connection requires a SIM card with data connectivity (preferably with unrestricted data roaming. PIN
code query must be disabled). The product package includes a 3G modem, power source and an antenna. SIM card with
data connectivity can be acquired from Ouman (3G-L1 or 3G-L2) or your own operator.
In addition, Ouman Access service and an Ouman Access compatible terminal such as Oulink, Ouflex A or external Ac-
cess device, are needed to establish a secure connection from the Internet to automation devices. For more information
about the Ouman Access service, please visit our website at www.ouman.fi/dokumenttipankki
Installation
and start-up:
1
2
SIM card
slot
SIM card holder
release button

Modem signal lights:

Indicator light
Power
Signal
Network
Activity
Wi-Fi
Access-device
RJ-45
3G-MOD3 is delivered with the Ouman connection settings installed. If using the
Ouman 3G-L1 or 3G-L2 connection, default settings can remain as set. If some
other operator' s SIM card is used, connection settings may need to be changed.
For the correct data traffic settings, please contact your own service provider. To
change connection settings, see the instructions on p. 2-4.
Insert SIM card into the 3G-MOD3 device (see attached picture). The card must be a
1 1
mini-SIM (25 mm x 15 mm). Press the release button with e.g. the tip of a pen.
Connect the external antenna to 3G-MOD3' s 3G Antenna connector. Avoid placing
2
the antenna close to thick stone walls.
as high as possible or next to a window.
With an RJ-45 cable, connect LAN1 port of the 3G-MOD3 to Access-compatible
3
device' s internet / WAN connector. The cable must be CAT-5E or more.
Plug in the power cords to both devices (power on). The system is now ready for use.
4
When connecting your computer to 3G-MOD3, make sure the computer is adequately
secured.
Indicator light status
Red on
Red blinking
Green on
No light
Yellow light on
Yellow light blinking
No light
Yellow light on
Yellow light blinking
No light
Yellow light on
Yellow light blinking
No light
Blue light on
Blue light blinking
No light
4
3
Wi-Fi
antennin liitin
4
Power supply
In demanding conditions, place the antenna
Functional description
Hardware failure (Note! When the modem is connected to power, indicator
light comes on for a moment and then goes off. This is totally normal.)
Software error
Modem connected to power
Modem not connected to power
Radio network connection OK
Radio network connection weak
No connection to radio network
SIM card in place
Device has registered to radio network
No SIM card in place
Mobile data service connected
Network sends and receives mobile data
Mobile data service not activated
Wi-Fi network activated
Wi-Fi sends and receives data
Wi-Fi not activated
1
3G-MOD3
Power supply
2
External antenna
3G auxiliary
antenna connector