OUMAN GSMMOD4 Manual

Advertisement

EVO

GSM modem technical specifications:

What does the LED indicate about modem status?

GSM modem
GSMMOD4 includes a GSM-modem and a cable which enables
you to contact the modem directly to the controller or the control
device. As a new model of the GSMMOD4 modem, EVO has
entered the market. The cable that comes with the package is
model-based (the internal connections of the blue cable of the
EVO-model are different than the connections of the black cable
of the older version).
The package includes a network device, power cable and moun-
ting accessories for the mounting of the DIN-rail. The modem is
equipped with a fixed antenna that can be replaced for a 2,5m
external antenna if necessary (additional equipment).
It is possible to purchase a business-level GSM-interface from
Ouman that is meant for machine communication and is more
reliable in congested conditions than the consumer-level interfa-
ce. The interface is ready for use (available only in Finland).
Electrical number:
Measurements:
Weight:
Operating temp:
Storing temp:
Operating voltage:
Rated current:
Warranti:
Optional accessories:
ANT1:
CE-GSM10:
LED indicator light
LED is not ON:
The modem is not on. Connect the modem to the network device.
LED is ON:
The power is on but the modem is not ready to use.
Inspect the following:
- The regulator has the same PIN as the GSM modem's SIM card
PIN code.
- If the GSM modem is connected to the EH-200/ Lämpöässä/ Goepro
controller, perform the start-up function.
-
If the GSM modem is connected to the EH-105 controller, perform
modem initialization.
- If the modem is connected to EH-60/EH-686, turn the power off from the
device momentarily after connecting the modem.
The modem is ready to use.
LED blinks slowly:
The modem sends or receives messages. If a message does not come
LED blinks rapidly:
from the controller, check the text message you have sent to see that
the device ID and keyword have been written correctly.
Also check that the controller has the operator's message centre
number of the GSM connection you have in use.
71 655 94
88 x 60 x 26mm
100g
-15 ... +50°C
-20 ... +65°C
5 ... 32VDC
650mA
2 year
External antenna 900/1800MHz,
with 2.5-meter cable.
Antenna cable extension, 10 m
Status of the modem/ Instructions
1/4
GSMMOD4
GSMMOD4_evo_engl.indd 2013_02_05

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the GSMMOD4 and is the answer not in the manual?

Questions and answers

Summary of Contents for OUMAN GSMMOD4

  • Page 1 GSMMOD4 includes a GSM-modem and a cable which enables you to contact the modem directly to the controller or the control device. As a new model of the GSMMOD4 modem, EVO has entered the market. The cable that comes with the package is...
  • Page 2 Connecting the GSM modem to Ouman regulation and control devices Products: Products: EH-200, EH-105, EH-60 and EH-686 Lämpöässä and Geopro green yellow EH-200/ EH-60/ brown yellow Connector cable Connector cable EH-105/ EH-686 green brown Lämpöässä/ jumper wire Geopro Power (5–32VDC) is supplied to the modem using either the mains adapter or...
  • Page 3 Modem type: On the regulator, select Nokia/Siemens as the modem PIN code: type unless the selection includes Ouman/Fargo. The PIN code for all program versions of the EH-686 is 0000. For the EH-60, the PIN code used to be 0000, but Perform start-up or modem initialization with the has changed to 1234 as of version 2.4.9 (sold after 1...
  • Page 4 This product must not be disposed of together with other com- mercial waste. OUMAN OY Southern Finland sales office: Voimatie 6, 90440 Kempele Upseerinkatu 3C, 02600 Espoo Tel.

Table of Contents