Preparing The S3; Balancing Your Smartphone - Kaiser Baas S3 Complete User Manual

P R EPAR I N G T H E S 3
Initial Setup
Make sure the Gimbal is fully charged
before use. Connect the USB wall charger
(not included) to the Micro USB charging
port using the supplied charging cable.
0 5 - E NG
The battery status indicator will be red
when the power cable is connected. The
battery is fully charged when the battery
indicator light turns green.
The battery indicator will flash red when the
battery is low.
Recommended charging time is 3-4 hours.
Maximum runtime is 5 hours.
MO U NTI N G AN D BA LA N CI N G Y O UR S MA RTP H O NE
Smartphone
IMPORTANT: Before you switch on and
balance your Gimbal, please mount your
Smartphone.
Pull the sides of the holder outwards and
place the Smartphone horizontally in the
holder, then gently release the sides.
0 6 - EN G
Once the phone is in the holder, slide the
phone into the groove of the tilt motor.
Smartphone Screen