Duramaxx EYEVIEW Series Manual page 22

Step 6
Click the button of "Apply". The camera will restart and connect to the local WiFi network au-
tomatically. The connection will be done when the blue indicator is solid on. This process may
take around half minute.
Step 7
Until now, the camera should have been added into the APP. Re-lauch the APP to complete
the connection, which will take around 2 to 10 seconds. The camera icon will be in grey while
connecting and will change to white color after connected. Click the preview icon to enjoy the
real-time IP Camera monitoring.
Notice: If you want to use the camera in different WiFi network, the previous settings should be cle-
ared by clicking the RESET button with a proper tool such as screw driver with dimension around 2
to 3mm. Push the RESET button and hold for 5 seconds to restart the camera. After around 1 minute
until the blue indicator flashing, repeat the above 7 steps to connect to the new network.
22