Duramaxx EYEVIEW Series Manual page 14

Preparation: Connection and app download
Connect the power supply for the IP Cam and wait for around one minute until the blue indicator
is flashing. If the indicator failed to be flashing in blue, you need to find a proper tool(diameter
around 2~3mm) such as tooth pick or screw driver to push the RESET button and hold for 4 to
5 seconds until the indicator become solid red. The IP Cam will restart. (Notice: The RESET is
not hardware reset, which means if you cut off the power and reconnect to power supply, you
need to wait around 30 seconds to push the reset again.)
You need to download and install the Guard.xxx.APK(xxx for Version) before setting the IP
Cams. The following 5 steps will guide you to complete the Guard IP Cam connection.
Download app for Android: Download app for iOS:
14