MAINTENANCE AND SERVICE
•
Operate this unit for 30 minutes before using with product (no load) to help
the equipment run safely and remove of any moisture inside chamber.
•
It is recommended to perform "drying-out" (no load operation for 30 minutes)
at least once a month while the equipment is not used.
Symptom
Unit does not work
Temp does not go down
Possible Causes of Problem
Check power is properly connected
Push
On/off switch
Check installation site conditions
• Temp: 68
F – 77
F (20
C – 25
°
°
°
• Humidity under 80%
15
C)
°