Advertisement
L-Side
** Note: Retaining Screw MUST be removed before inserting the Rods.
** Note: Flats must be facing inward.
• Modular, Arca Compatible Multi-piece design
• CNC Machined from T6061 Aluminum
• Anodized scratch resistant finish
• Hardened steel, captive adjustable rods
• Safety stops on both Vertical and Horizontal Plates
• Made in the USA
Check periodically for loose screws and tighten with the hardware that is
included with the L-Bracket. Before using the bracket make sure it's attached
to your camera correctly and the vertical component is tightened securely.
Flat-Head Locking Screws
If you have any questions please call us at 1-708-263-4443 or
Toll Free 1-888-413-3332 or email info@ProMediaGear.com
Rod Installation
** Note: The Rod is inserted passed the hole. Now insert the screw.
Hardened Steel Rods
Features
Maintenance/Operation
Replacement Products
Customer Service
www.ProMediaGear.com
(patent pending) ** Some Models May NOT Feature Captive Rods **
#PASL1
Strap Loop
Bracket Plate Side
Advertisement
