Technika LCD 32-244 User Manual page 22

PC Operation
PC SETTINGS
To access this menu, press [MENU] button on the remote control. To enter a menu press [OK]
If you wish to make changes to any of the default settings, use the scroll
any settings press [OK] button.
To exit this menu at anytime, press [EXIT] button.
Auto Adjust - Lets you automatically confi gure the television to be used as a computer monitor
H Offset - Changes the horizontal position of the picture
V Offset - Changes the vertical position of the picture
Size - increase picture size
Phase - To adjust delay time of phase in order to reduce the noise of picture
Position Reset - Changes back to the original settings
Tip: If the computer is left in-active for a period of time, the television will switch into a 'sleep' state
(the screen will power off to save power). To switch back on press the standby button.
Manual - Technika - LCD32-244.indd Sec1:23 Manual - Technika - LCD32-244.indd Sec1:23
AV
buttons. To confi rm
23 23
9/6/2010 4:52:11 PM 9/6/2010 4:52:11 PM