Getting Started - Initial Set Up - Technika LCD 32-244 User Manual

Getting Started - Initial Set Up

GETTING STARTED  INITIAL SET UP
1) Using the RF cable supplied, connect the TV
to the TV Aerial wall socket (Fig A)
3) Switch on the television using the
power on/off switch.
5) You will now be welcomed with the initial
set-up screen.
If it does not appear, on the remote control,
please press [MENU] then 8-8-8-8 and the
menu will appear.
Press OK on the remote control and tuning
will start.
If you are missing channels, the reason for this is likely to be signal strength, you should
consider connecting signal booster and re-tuning the TV.
Tip: If the TV fi nds some, but not all, of the Digital channels, the TV is functioning correctly but the
signal being received is not strong enough. (The signal strength needs to be above 85% - you can see the
signal strength the TV is receiving when you change channels/ programmes) you will need to increase
the signal reception in order to receive all of the channels available. The most economical way to do
this is by purchasing and connecting a 'signal booster' in between the TV and the TV aerial socket. If this
does not solve the problem, you will need to upgrade the TV aerial to a digital hi-gain compatible aerial
Manual - Technika - LCD32-244.indd Sec1:11 Manual - Technika - LCD32-244.indd Sec1:11
2) Connect the power cable to the Electrical
outlet (Fig B)
Fig A
4) Insert the batteries supplied into the
Remote control and press the Standby
button to power on the TV
Power on/off
Fig B
6) After tuning the following screen will
appear.
11 11
9/6/2010 4:51:54 PM 9/6/2010 4:51:54 PM