Using The Timers - Technics SC-DV290 Operating Instructions Manual

3 1
. .
PLAY/ REC
1
CLOCK/
TIMER
SET
2
TUNING
SET
3
ê
/I
38
2
.
PLAY
.
PLAY
.
PLAY
.
PLAY
.
CH PLAY
.
PLAY
.
PLAY
.
PLAY

Using the timers

The play timer
This timer starts play of the selected source at the selected time.
The displays in the illustrations show settings for preset radio channel 1 to
play between 6:30 and 7:40 at
Preparation: Turn the unit on, set the time (
tions if you want the timer to start playing the radio
( page 28).
1
Press [CLOCK/TIMER] to display " PLAY" on
the tuner/amplifier.
Each time you press the button:
CLOCK
Press [SET] within 3 seconds.
2
Follow these steps to set items
Press [TUNING (
tion required and
Press [SET].
Start time
Finish time
Source
TUNER
Insert a disc or tape if you select these sources.
If you select TUNER
Select a preset channel.
Volume
The play timer is now on standby. The display shows each condition
again then restores the original display.
3
Press [ /I] to turn the unit off.
PLAY/ REC indicator remains illuminated to show the play (or
record) timer is on.
The timer starts at the set time with the volume increasing gradually to the
set level.
To cancel the timer
Press [ PLAY/ REC] so " PLAY" goes out.
Each time you press the button:
PLAY REC
The play timer will be canceled, but the settings stay in the memory.
For your reference:
When you insert cassettes in decks 1 and 2, deck 1 has priority.
MHz
48 dB.
page 12), preset radio sta-
PLAY REC Original display
or )] to select the condi-
DVD TAPE
PLAY REC Light off
to .