Technics SC-DV290 Operating Instructions Manual page 33

CH SELECT
TEST
TOP MENU
EQ
NAVIGATOR
S. 3D AI EQ
DISPLAY
VCR(EXT)/
VDP(AUX)
CANCEL
PLAY MODE
MIX 2CH
AUDIO
MIX 2CH
SHIFT
DOLBY DIGITAL and DTS
Play a DVD encoded with Dolby Digital or DTS.
"ÎDIGITAL" or "DTS" appears on the tuner/amplifier.
To down-mix Dolby Digital or DTS (5.1ch) signals to
2 channels
Press [SHIFT]i[MIX 2CH].
To cancel
Press [SHIFT]i[MIX 2CH] again.
When "D.MIX" is flashing [DVD-A]
The DVD-Audio contains multiple-channel signals that cannot be down-
mixed.
DOLBY PRO LOGIC
1
Press [Î PRO LOGIC, OFF/ON].
The indicator turns green.
2
Playback a Dolby Surround source.
To cancel
Press [Î PRO LOGIC, OFF/ON] so the indicator turns off.
Note
≥This does not work when playing multi-channel Dolby Digital.
≥Turn Dolby Pro Logic off when playing a DVD recorded with
5.1-channel Dolby Digital or DTS. The surround effects will not be repro-
duced correctly if this is left on.
SUPER
1
SURROUND
SUBTITLE SETUP
SLEEP POSITION MEMORY GROUP
1 2 3 DISC
4 5 6 10/-/--
8 9 0
7
PRO LOGIC CH SELECT SUPER SRND
TEST
MENU
SUPER ,
SOUND EQ
DIRECT
PLAY LIST
ENTER
AV EFFECT
RETURN
TAPE/
TUNER/
DVD
DECK 1/ 2 BAND
/
DIGITAL
SLOW/SEARCH
S.WOOFER
SHIFT MUTING SKIP
VOLUME
SUPER SURROUND
Press [SUPER SURROUND] and select "MOVIE" or
"MUSIC".
The indicator turns green.
The display on the tuner/amplifier changes each time you press the button:
MUSIC>MOVIE>STEREO SOUND
^------------------------------------------------}
§
Original display when playing DVDs
To cancel
Press [SUPER SURROUND] to select "STEREO SOUND". The indicator
goes out.
Note
Turn SUPER SURROUND off when playing a DVD recorded with
5.1-channel Dolby Digital or DTS. The surround effects will not be repro-
duced correctly if this is left on.
Speaker level adjustments
Remote control only
DOLBY DIGITAL and DTS, DOLBY PRO LOGIC
If the level of the speakers appears to be different while listening to a
source, adjust the levels of the speakers to the same apparent level.
Preparation: Set the volume level of the front speakers normally used for
enjoying the source.
1 While stopped
Press [SHIFT]i[TEST] to output a test signal.
A test signal is output from each speaker in order.
To stop the test signal, press [SHIFT]i[TEST] again.
Lch: Front left speaker
Cch: Center speaker
Rch: Front right speaker
RSch: Right surround speaker
LSch: Left surround speaker
(No signal is output for the subwoofer.)
≥The surround channel for Dolby Pro Logic is monaural so the indicator
appears as "Sch" instead.
2 While the speaker to be adjusted is outputting a signal
Press [3] (to increase the level) or [4] (to decrease the level).
The level of the speaker changes.
Repeat step 2 as desired.
To adjust the levels during play
1 Press [CH SELECT] to select the speaker.
Each time you press the button:
In Dolby Digital and DTS
Lch>Cch>Rch>RSch>LSch>SWch
^---------------------------------------------------------------}
SWch: Subwoofer (Adjust only when connected)
In Dolby Pro Logic
Lch>Cch>Rch>Sch
^-----------------------------------}
2 Press [3] or [4] to adjust the level.
SUPER SURROUND
While playing a source
1. Press [CH SELECT].
2. Press [3] (to increase level) or [4] (to decrease level).
Manufactured under license from Dolby Laboratories.
"Dolby", "Pro Logic" and the double-D symbol are trademarks of
Dolby Laboratories.
Manufactured under license from Digital Theater Systems, Inc. US
Pat. No. 5,451,942, 5,956,674, 5,974,380, 5,978,762 and other world-
wide patents issued and pending. "DTS" and "DTS Digital Surround"
are registered trademarks of Digital Theater Systems, Inc. Copyright
1996, 2000 Digital Theater Systems, Inc. All rights reserved.
§
(off)
33