Download Print this page

Panacom LP-8804 User Manual

Rechargeable turntable

Advertisement

Available languages

Available languages

Quick Links

Advertisement

loading

Summary of Contents for Panacom LP-8804

  • Page 3 LP-8804 - USER MANUAL ENGLISH Thanks for purchasing Panacom Suitcase Turntable .Please read this manual carefully before using this Turntable. Description: Pg. 3...
  • Page 4 1. Lock catch. 2. Plastic dust cover. 3. Adapter - Use this when playing 45rpm records with cut out centres. 4. Tonearm lift lever. 5. Turntable. 6. Auto stop control. 7. Speed selection - Three speed for choice: 33.3, 45, 78 rpm. 8.
  • Page 5 18. Skip Up button. 19. Play or pause button. 20. Skip down button. 21. Mode: to select FM radio/USB/SD or LP songs. Initial Set-Up Mains Connection Ensure that the mains voltage of your home corresponds to the operating voltage of the unit. Your unit is ready to be connected to a mains voltage of 100-240V/50-60Hz.
  • Page 6 If the switch is in the off position then it will keep revolving until the tone arm is returned to the tone arm rest. - Lift up the tone arm and put it on the rest position when you have finishes playing.
  • Page 7: Maintenance

    BT Connection Output function - To connect BT Connection speakers via BT. - Turn on the BT Connection speakers when the turntable is on, and then turn BT Connection speakers to BT mode, then it will connect directly. - If cannot connect quickly, press the NO.3 BT connection reset button once.
  • Page 8 Please exercise extreme care whilst performing this operation so as to avoid the tone arm and audio line wires from any damage. NOTES: We advise you to clean your records with an anti-static cloth to preserve its quality. For the same reason your stylus should be replaced periodically (approximately every 250 hours) Dust the stylus from time to time using a very soft brush soaked in alcohol.
  • Page 9 LP-8804 - MANUAL DE USUARIO ESPAÑOL Gracias por comprar la Bandeja giradiscos de Panacom. Lea este manual cuidadosamente antes de usarla. Pg. 9...
  • Page 10: Instalación

    DESCRIPCIÓN 1. Traba. 2. Cubierta antipolvo 3. Adaptador: utilícelo cuando reproduzca registros de 45rpm con centros cortados. 4. Palanca de elevación del brazo. 5. Placa giratoria. 6. Control de parada automática. 7. Selección de velocidad: 33.3, 45, 78 rpm. 8. Botón de reajuste de Conexión BT. 9.
  • Page 11 Para Reproducir un Disco - Coloque un disco a elección sobre el tocadiscos. En caso de que sea necesario, coloque un adaptador en el eje de disco. - Elija una velocidad de reproducción de las tres opciones de velocidad disponibles: 33.3, 45 o 78rpm. - Encienda el motor de rotación.
  • Page 12 - Presione el botón Next para reproducir la pista siguiente. - Presione Next sostenidamente para aumentar el volumen. - Presione el botón Prev para reproducir la pista anterior. - Presione el botón Prev sostenidamente para disminuir el volumen. Función de salida como Conexión BT Para conectar altavoces Conexión BT a través de BT.
  • Page 13 Mantenimiento Para reponer el STYLUS siga las instrucciones de las imágenes. 1) Quite el seguro del brazo. 2) Quite la tapa del cartucho y libere la aguja. 3) Separe suavemente el cartucho del encaje. 4) Separe por completo al cartucho de la línea de sonido. 5-8) Para reponerlo por uno nuevo, inserte la línea de sonido de esta manera e instale suavemente el cartucho en su posición original.
  • Page 14 Cuando transporte su tocadiscos, no se olvide de: • Colocar la tapa protectora sobre el stylus • Asegurar al brazo del tocadiscos a su posición. Catacterísticas: 1.Bandeja giradiscos de 33, 45 y 78 RPM. 2. Altavoz incorporado (2x1W RMS). 3. Lector USB / SD. 4.
  • Page 15 Pg. 15...
  • Page 16 Pg. 16...