Motorola DS6878 Manual page 2

8) Your Scan Gun should now connect to your device.
9) Scan the following codes (left to right) to add an Enter Key to the end of each string it decodes
10) Finally, it is strongly suggested you scan the following code to balance the output speed of the
scan gun to the input read speed of your device. Typically, this is 20Msec but varies based on
the specific device and browser you are using.
OPTIONAL based on your browser and specific mobile device
If for some reason the 20 msec is too slow you can try no delay.
If for some reason 20msec is too fast (if you get partial reads)
you can slow down to 40 msec.