Table of Contents
Advertisement
Automatic Channel Setting
This set is equipped with an automatic search system which will search for and store all
channels available in your region. To help identify the programmes, we suggest that you have to
hand a TV guide or daily newspaper.
Ensure that the aerial lead is connected to the TV set.
Check that any equipment connected only via the aerial (video recorder or satellite equipment) is
operating.
Switch off any equipment connected via the SCART socket.
Installation
Press the ON/OFF button, the indicator lamp lights up.
If the television set remains on stand–by, press one of
the buttons on the remote control numerical keypad.
When the television set is turned on for the first time, the
Installation menu appears automatically.
If this is not the case, you can call it up by:
– pressing the
times.
Press
to confirm.
A new menu appears. Automatic search begins. The cur-
sor moves from left to right on the VL line, then on the VH
line and then on the U line. The channels found are stored
in memory in order starting from programme PR 01.
You can stop the automatic search at any time by pressing
the
button.
The search stops automatically at the end of the U band
or when 99 channels have been found.
The Programme Organizer menu then appears automatically.
The channel stored on programme PR 01 is selected (see next page).
button on the remote control three
AUTO INSTALL.
EURO
AUTO INSTALL.
EURO
VL
PR01
GB
5
Advertisement
Table of Contents
