Playing A Tape; Recording; From Tuner; From Aux - THOMSON Life CS300 User Manual

CS300 EN 11/20/02
Tape Player

Playing a Tape

1. Press SOURCE on the main unit repeatedly or
TAPE on the remote to enter Tape mode.
2. Press on the PUSH OPEN/CLOSE area of the
cassette door to open it.
3. Insert a tape into the door and push the door
closed. VFD will display "CA 0000".
4. Press SKIP BACKWARD
FORWARD
and fast forward tape to position the tape to the
desired starting position.
5. Press PLAY/PAUSE
Press again to pause playback.

Recording

From Tuner

1. Insert a tape into deck.
2. Press SOURCE repeatedly on the main unit or
TUNER on the remote control to select
Tuner (TU).
3. Press BAND/APP to access the desired band.
4.. Press SKIP FORWARD
BACKWARD
TUNING - or +
to tune to the station to be recorded.
5. Press REC •II to enter Record standby. Press
again to begin recording.
6. press STOP to end recording.
10:19 AM Page 13
or SKIP
on the main unit to rewind
to begin playback.
or SKIP
on the main unit or
on the remote control
From CD
1. Insert a tape into deck .
2. Press SOURCE repeatedly on the main unit to
select CD then press DISC SKIP or DISC1 / DISC2
/ DISC3 to select the disc to be recorded.
3. Press SKIP FORWARD
BACKWARD on the main unit or
TUNING - or + on the remote control
to select the track to be recorded.
or Press PROG•SET to enter program mode.
4. Press REC •II to enter Record standby. Press
again to begin recording.
5. press STOP to end recording.

From AUX

1. Insert a tape into tape deck.
2. Check that the auxiliary device has been
connected correctly to the AUX connector on the
back of the system.
3. Start playback on the auxiliary device.
4. Press REC•II to enter Record standby. Press
again to begin recording.
5. Press STOP to end recording.
EN
or SKIP
9