MotoTote MTX Series Intended Use And Limitations

Instructions
MotoTote MTX
Intended Use and Limitations
PLEASE READ THESE INSTRUCTIONS CAREFULLY!
The MotoTote is a hitch-mounted carrier for transporting motorcycles. Do not use it for any other
purpose.
Do not exceed product limitations or deviate from these instructions
Bike
MTXS MAX=600 lbs/272 kg
MTX3 MAX = 500 lbs/227 kg
+
MotoTote
60 lbs/27 kg
=
TOTAL
CANNOT EXCEED
Maximum weight capacities for MotoTote carriers manufactured before May 2015 are as follows:
Additional items you will need
One 5/8" wrench or socket
One 11/16" wrench or socket
Accessory Pack Contents
Check the accessory pack for these items: Note that some of the items may already be installed on the MotoTote
End caps
1 ea 4 ea 8-12 ea
Additionally, the Zero Wobble Bolt Kit includes on long bolt, one flange nut, and one flat washer
Revised 05/16/2015
for
carriers:
...the tongue weight capacity of your vehicle OR 10% of vehicle's total towing
capacity. This info is in the vehicle user's manual or the manufacturer's website.
Note: The vehicle must have a class III or better hitch receiver AND the vehicle
must be rated to support the total weight of the bike + MotoTote.
Bolts Nuts
1 short
5 locking
4 medium
2 flange
3 long
and
MTXS
Four high quality
tie-down straps
Washers Lanyard
Ramp keeper tab
Lynch
1 lock
pin
5 flat
MTX3
MTXS = 550 lbs./250 kg.
MTX3 = 450 lbs./205 kg.
Hex wrench
1 ea
1 ea
1 ea
Page 1 of 4