Download Print this page
CEL-FI GO RED G32-12 Quick Start Manual

CEL-FI GO RED G32-12 Quick Start Manual

Smart signal booster

Advertisement

Quick Links

LED Function & Troubleshooting
Cel-Fi GO RED features an LED on the top face to indicate the unit' s state:
LED
MEANING
Solid Green
The unit is boosting properly.
Note: Boost value can be as high as 9. Use the Cel-Fi WAVE app
to check boost number. The antennas may be relocated and/or
repositioned to improve system performance.
Blinking Green
Normal function, unit is coming online, scanning for networks
to boost.
If the unit remains in this condition for longer than ~10
minutes, make sure the antennas are appropriate for the
application and carrier frequencies, and are connected
properly.
If the antennas are connected properly, yet the unit remains in
the Blinking Green state, it's possible there are no bands for the
GO RED to pick-up and boost. Check to make sure the FirstNet
Band 12 or Band 14 is available on site.
Blinking RED
The unit is in an ERROR CONDITION, but still able to
communicate with the WAVE app. Use the WAVE app to check
the error type and help determine a remedy.
Solid RED
The unit is in an ERROR CONDITION but is not able to
communicate with the WAVE app. Power cycle the device. If the
unit remains in the Solid Red error condition contact the vendor
for support.
Antenna Options:
Review the latest authorized antennas at www.cel-fi.com/antennas
Cel-Fi Indoor
Cel-Fi Wideband
Omni Donor
Panel Antenna
Antenna
A11-V43-100
A52-V32-100
Cel-Fi Mobile Mag
Cel-Fi Mobile Bolt
Mount Antenna
Mount Antenna
A41-V21-100/ 101
A41-V36-200/201
Cel-Fi Mobile
Cel-Fi LPDA Antenna
Server
A62-V44-100
Antenna
A41-V30-100
Cel-Fi Trucker
Cel-Fi Marine Antenna
Antenna
A11-V37-100
A21-V31-100

Specifications:

G32-12/14
Dimensions
Power (max)
Bluetooth (LE Ver. 4.2)
Environmental
Antenna Connectors
Standards
Cel-Fi Wideband
Directional Antenna
A32-V32-100
Cel-Fi Whip
Antenna
A21-V33-100
qsg_go-red_18-1016
www.cel-fi.com
Model:
BAND
NAME
DOWNLINK
12
700a
729
746
14
700 PS
758
768
LENGTH
WIDTH
HEIGHT
272.5 mm
96.5 mm
43.5 mm
Gain
Up to 100dB system gain
POWER
UPLINK
Band 12
24dBm
Band 14
23dBm
FREQUENCY
2042 – 2480 MHz
Bluetooth: LE Ver. 4.2
Bluetooth frequency: 2042 - 2480 MHz
Operating Temp: 0 - 65C
Relative Humidity: 95%
NEMA-4
SMA-Female
3GPP TS 25.143 Rel.10
3GPP TS 36.143 Rel.10
RoHS 2
BQB (Bluetooth)
FCC
Cel-Fi GO RED

Quick Start Guide

UPLINK
699
716
788
798
WEIGHT
Smart Signal Booster
850 g
DOWNLINK
16dBm
16dBm
POWER
0dBm
G32-12/14
Cel-Fi GO RED is the evolved smart signal booster
that delivers cellular coverage in buildings for FirstNet
emergency communications. The Cel-Fi GO RED
connects to an external donor antenna to draw in the
FirstNet cellular signal from the macro network. The
smart signal booster improves the signal through
digital technology, amplifies it, and relays it to the
server antenna, to provide network coverage.
Booster
Other variations of the product package may
include additional internal and external antennas
or components.
For more information, visit: www.cel-fi.com
IN THE BOX
Power Supply

Advertisement

loading

Summary of Contents for CEL-FI GO RED G32-12

  • Page 1: Specifications

    Cel-Fi GO RED Specifications: LED Function & Troubleshooting Quick Start Guide Cel-Fi GO RED features an LED on the top face to indicate the unit’ s state: Model: BAND NAME DOWNLINK UPLINK MEANING G32-12/14 700a Solid Green The unit is boosting properly.
  • Page 2 Cel-Fi GO RED Installation Cel-Fi GO RED has a Donor Antenna Port and a Server Antenna Port. They are marked on the device with icons (see illustration) It is critical that the Donor and Server antennas are to the correct port.

This manual is also suitable for:

Go red g32-14