Chapter 8
SpeedTouch™ Remote Access
Interface access list
IPSec Protection
80
The interface access list of a service contains the interface groups from where a
user is allowed access to that specific service.
The interface access list can contain 1 or more of the following groups:
lan:
the local or corporate network
local:
the serial console cable
wan:
the Internet
It is possible to use IPSec to protect remote management. You can either use IPSec
tunnel mode or IPSec transport mode. For more details, refer to the IPSec
configuration guide.
E-DOC-CTC-20051017-0155 v1.0