Linksys WRT110 Quick Start Manual

1. Connect computer to Router via network cable.
2. Confirm computer is connected to router with an assigned IP address:
a) Click on Network Icon in Notification Area
b) Click Open Network and Sharing Center
c) From Network and Sharing Center, click Local Area Connection
d) From, Local Area Connection Status window, click Details
e) Verify that the IPv4 Address does not start with 169, if it DOES, contact SP Networking.
3. Write down the IPv4 Default Gateway IP address from the Details window.
support@SPNetworking.com
Change wireless password on Linksys WRT110
a
www.SPNetworking.com
1403 W. Prien Lake Rd
Lake Charles, LA
d
b
c
e
3
337-376-0655