Table of Contents
Advertisement
06-EFC030-EN.qxd
15/06/05
O Adjusting the sound
Display the OVERVIEW menu by pressing the
SOUND
Return
Equaliser
Sound type
Balance
Auto Vol Level
Auto Vol Level : this function softens loud sound effects. It is particularly useful when you are watching television late at
night, for instance.
Check the box to enable this setting by pressing
to close the menu. Select the option Return and press
Press
EXIT
Broadcast
Mono
Nicam mono
Nicam / IRT stereo
Bilingual Nicam
Bilingual IRT
AV
Graphic equaliser
GRAPHIC EQUALISER
Return
Preset
Freq. range
You can access the list of preset sound settings directly by pressing the
Preset
option and choosing one of the preset parameters from the list.Your selection is applied to all channels and AV programmes.
Freq. range
: the graphic equaliser has five frequency bands. Select each band in turn using the
adjustments using the
Note: When you are setting the graphical equaliser,
EXIT
Press
to close the menu.To return to the
13:40
Page 9
MENU
The SOUND menu appears with the following options:
Equaliser : this option gives access to the graphic equaliser (see below).
Sound type : this option is used to select the appropriate sound type.
Note: the options available depend on the programme you are watching.
Stereo...
The table on this page indicates the sound types available for each type of
broadcast.
Balance : use this setting to balance the sound between the right and left
speakers.
.
OK
Options
Auto, Mono
Nicam, Mono
Stereo, Stereo+, Mono, Mono+
S1, S2, S3
S1, S2
Stereo, S1, S2
Select
This menu is used to select a preset parameter and define your own settings
using the graphic equaliser.
Personal
It offers the following options:
8 kHz
Preset
programme you are watching.
The
OK
buttons. Press
to confirm.
Personal
appears under the
SOUND
button. Select the Sound option and press
to return to the OVERVIEW menu.
OK
Stereo+ : Enhanced stereo
Mono+ : pseudo-stereo
Equaliser
SOUND
from the
: use the
buttons to select the appropriate setting for the
Personal
setting stores your graphic equaliser settings.
PRESETS
button (red) on the remote control, selecting the
Preset
option.
Return
OK
menu, select
and press
9
Operation
to confirm.
OK
OK
menu and press
to display the menu.
buttons and make the necessary
to confirm.
EN
Advertisement
Table of Contents
