Adjusting The Picture - THOMSON AV1 Instruction Manual

Adjusting the picture

The PICTURE menu can be used to adjust the current settings, to apply preset settings and define your own
preferred settings.
PICTURE
Return
Preset
Brightness
Contrast
Colour
Sharpness
Tone
NTSC Tint
Return : use the buttons to go back to the OVERVIEW menu
Preset: use the / ÿ buttons to select from the preset settings offered (Standard, Film, Sport, Studio,
Personal) the one which suits best the programme you are watching.
The Personal option contains the values you have defined for Brightness, Contrast, Colour and Sharpness
settings.
Brightness, Contrast , Colour, Sharpness: adjust these settings as required using the
Brightness, Contrast, Colour and Sharpness settings are automatically stored under Personal in the
Preset option.
Preset, Colour and Sharpness options are not displayed in PC mode.
Tone: this options controls colour temperature.
Use the / ÿ buttons to select between Cold, Neutral and Warm.
NTSC Tint : This option is only available for NTSC audio-visual sources.
Adjust the tint of the picture using the
If the device is in PC mode you can access following functions.
Phase, Synchronization, V-Position, H-Position.
Select the desired option and adjust as required using the
Press EXIT to close the menu.
Note : pressing PRESETS button (Red) in TV mode out of the menus opens the PICTURE menu with the
Preset line highlighted.
Studio...
------|-----------
------|-----------
------|-----------
------|-----------
Warm...
------|-----------
/ ÿ buttons.
16
Display the OVERVIEW menu by pressing the
MENU button.
Select the Picture option and press OK to confirm.
The PICTURE menu appears. It offers the following
options:
/ ÿ buttons.
/ ÿ buttons.