Table of Contents
Advertisement
DTH220E_EN
22/03/02 11:08
Programming playback
To use the programmed play function, you must first make up the list of music tracks (CD) or
chapters (DVD) you want to play. You can memorise up to 20 tracks or chapters.
Select Edit Program using the
1.
The programming menu appears.
2.
Follow instructions a, b, c,
selection.
a.
Choose a title then a chapter (or a track only for an
Audio CD) using the
remote control number keys.
Select Add
b.
(1)
Check that the title has been memorised in
(2)
table
.
c.
Repeat steps
Select Play and validate by pressing
d.
programmed playback
1.
To remove a chapter or a track, select Delete
OK
and press
title between 2 other titles Add will be replaced
by Insert .
Programmed play (for DVDs and Audio CDs)
Select Program Play if you want to listen to an audio CD or watch a DVD in the order that you have
pre-programmed using a list
Edit Program to display the list.
1.
If you haven't made up your list, programmed play will not be possible.
Page 17
Navigation
d
to make up your
Navigation
keys or the
OK
then press
to validate.
a
b
and
as many times as you wish.
OK
(2)
.
to validate. If you want to insert a
(1)
. To choose the playback order, refer to the next page and select
keys.
to start
2.
With an audio CD, the track of the song and its
playing time will appear in the table. With a
DVD, the title and chapter numbers will be
displayed in the table.
3.
To exit the programming function, press the
RETURN
key on the remote control.
17
Navigation
keys
EN
EN
Advertisement
Table of Contents
