THOMSON DTH210E Instructions For Installation And Use Manual page 21

DTH210E_EN 22/03/02 10:49
l
ock
To enable the Lock Player function, you must enter a password. The Ratings Limits function
enables you to control the type of discs or programs that your family can watch. If certain discs
contain information or scenes that exceed the rating limit you've set, they will not be played.
There are 8 rating levels.
Load a disc and press STOP. The player menu
appears.
select Lock using the
1.
2. press OK to validate,
3.
select a function using the
4. adjust the setting using the
DVD - lock Player
Select the Lock Player line and press
1.
2.
You are requested to enter a "new password". Enter your four-digit number
control number keys, then press
3.
You are requested to confirm. Repeat the operation.
• To disable the lock, select the Unlock Player line and press
• To change your password, select the Change Password line and press
new 4-digit code. Enter it once more to confirm.
1.
Choose a four-digit number that you will be able
to remember easily or note it down.
DVD - Ratings limits
Choose the rating limit: select Rated Titles then press
Navigation
keys, then press
• Non-indexed
select Unrated Titles then press
OK
then press
1.
This function is only available on DVDs for
which the publisher has set a rating limit. It
therefore depends on the disc.
Page 21
Navigation
keys,
Navigation
keys,
Navigation
OK
OK
to validate.
(1)
OK
to validate.
titles can all be
to validate. Select "Free Access" or "Password Required"
OK
to validate.
keys.
to validate.
OK to validate.
• If you've forgotten your password, consult the
Troubleshooting guide at the end of this
manual ( k page 25).
OK to validate. Select the level using the
freely accessible or
1.
In Europe, very few discs have rating limits.
21
Navigation
keys
(1)
using the remote
OK
to validate. Enter your
require a password:
EN
EN