Advertisement
Quick Links
Operation Manual
WOOD MAKING IRON
ARTICEL 61077
Read and follow the operating instructions and safety information before using for the first time.
Technical changes reserved!
Due to further developments, illustrations, functioning steps and technical data can differ
insignificantly.
Updating the documentation
If you have suggestions for improvement or have found any irregularities please contact us.
© by WilTec Wildanger Technik GmbH
Seite 7
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
Advertisement
Summary of Contents for WilTec HS-060B-6
- Page 1 Due to further developments, illustrations, functioning steps and technical data can differ insignificantly. Updating the documentation If you have suggestions for improvement or have found any irregularities please contact us. © by WilTec Wildanger Technik GmbH Seite 7 http://www.WilTec.de http://www.aoyue.eu...
- Page 2 The information contained in this document is subject to change without prior notice. No part of this document can be copied or duplicated in another form without the prior written consent of WilTec Wildanger Technik GmbH. The WilTec Wildanger Technik GmbH assumes no liability for any errors in this user manual or the connection diagram.
-
Page 3: Symbols Used In This Manual
FEATURES 1 Marking iron 2 Marking tips 3 Marking stamps 4 Soldering tip © by WilTec Wildanger Technik GmbH Seite 9 http://www.WilTec.de http://www.aoyue.eu http://www.teichtip.de... -
Page 4: Switching On And Off
5 Knife blade 6 Collet for a knife blade 7 Handle 8 Cable with plug TECHNICAL SPECIFICATIONS FOR MODEL HS-060B-6 Rated Voltage: 230 V~ / 50 Hz Rated Power: 30 W Protection category: USING THE MARKING IRON MAIN CONNECTION The unit may only be connected to a single-phase main circuit with the same voltage as demanded on the machine’s rating plate. - Page 5 After a certain amount of time sooty deposits can build up on the tips (for example the marking stamps (3)). To be able to work precise and accurately remove the deposits with fine sandpaper. © by WilTec Wildanger Technik GmbH Seite 11 http://www.WilTec.de...
- Page 6 All WilTec electric devices that fall under the WEEE regulations are labelled with the crossed-out wheeled waste bin logo. This logo indicates that this electric equipment must not be disposed with the domestic waste.