Windows Nt4.0 Setup; Install The Modem Driver - Windows Nt4.0 - Iridium 9500 User Manual

DIAL-UP DATA -------------------------------------------------------------------------------------------------- WINDOWS NT 4.0 SETUP
3.2

Windows NT4.0 Setup

In order to install the modem driver and configure dial-up networking, you will need the following:
The Iridium World Data Services CD
An available communications port on your computer (e.g., COM1)
Administrator privileges for Windows NT4.0
3.2.1 Install the Modem Driver – Windows NT4.0
1. Close all applications.
2. Choose Start > Settings > Control Panel to open the Control Panel window.
3. Double click on Modems to open the Modems Properties window.
4. Click the General tab, and you will see all the modems installed on your computer. Click on
Add... to open the Install New Modem window. This will begin the modem installation
procedure. Henceforth, you can cancel at any time without affecting your system by clicking
Cancel.
Iridium Satellite LLC 14 Rev. 4; February 1, 2002