Table of Contents
Advertisement
Exercise caution when using
high-pressure or steam-jet
devices.
NOTICE
Cases and topcases made of alu-
minum have no surface coating.
The best possible appearance is
preserved with the following care:
Remove road salt and corrosive
deposits immediately with cold
water after completing the trip.
Cleaning sensitive
motorcycle parts
Plastics
ATTENTION
Use of unsuitable cleaning
agents
Damage to plastic surfaces
Do not use abrasive cleaners or
cleaners containing alcohol or
solvents.
Do not use insect sponges or
sponges with a hard surface.
Fairings and panels
Clean trim panel components
with water and BMW Motorrad
solvent cleaner.
Windshields and lenses are
manufactured in plastic
Clean off dirt and insects with a
soft sponge and plenty of water.
NOTICE
Soften stubborn dirt and dead
insects by covering the affected
areas with a wet cloth.
Clean with water and
sponge only.
Do not use chemical
cleansers.
Chrome
Carefully clean chrome parts
with plenty of water and
BMW Motorrad Care Products
motorcycle cleaner. This is
particularly important in the case
of road salt.
Use BMW Motorrad metal polish
for additional treatment.
Radiator
Clean the radiator regularly to
prevent overheating of the en-
gine due to inadequate cooling.
For example, use a garden hose
with low water pressure.
ATTENTION
Bending of radiator fins
Damage to radiator fins
When cleaning, ensure that the
cooler fins are not bent.
11
205
z
Advertisement
Table of Contents
