Table of Contents
Advertisement
Troubleshooting Tips
EN
Problem
System doesn't turn
on
No sound
Poor radio reception
CD doesn't play
CD sound skips
ESD Remark:
In case of misfunction due to electrostatic discharge just reset the product (reconnect of power source
may be required) to resume normal operation.
10
TM9049 EN
Solution
• Unplug the unit for a moment, and then plug it back in.
• Check the outlet by plugging in another device.
• Adjust volume setting.
• Make sure you've selected the correct function.
• Adjust the antenna for better reception.
• Try turning off electrical appliances near the unit, such as hair dryers,
vacuum cleaners, or fluorescent lights.
• Make sure you've put a CD in the tray.
• Make sure the CD's label is facing up.
• Try another CD.
• Make sure that Pause mode is not activated.
• Make sure CD function is selected.
• Clean the CD (as explained in "Maintenance").
• Check CD for warping, scratches, or other damage.
• Check for vibration or shock that may affect the unit; move the set if
necessary.
14
1/7/05, 10:19 AM
Advertisement
Table of Contents
